Double-ended alcohol hydroxyl long-chain alkyl silicone oil IOTA 8865H
Diol hydroxyl single-end long-chain alkyl silicone oil IOTA 8866
Hydroxyl terminated methyl vinyl silicone oil IOTA 1203V
Single-ended hydroxypropyl silicone oil IOTA2050
Alcohol hydroxy single-ended long-chain alkyl silicone oil IOTA 8861
IOTA 2056 PES Polyethylsiloxane fluids are mixtures of oligomers in the basic linear structure of the general formula:
CAS No.: 63148-61-8
Specific properties of polyethylsiloxane fluids are their full compatibility with mineral and synthetic oils, excellent lubricating properties, low gel point (below -70°C) and inertness towards structural and functional materials(metals, alloys, plastics, polymers, rubber, etc.)
Polyethylsiloxane fluids are colorless, odorless, chemically inert. They are soluble in aromatic and chlorinated hydrocarbons, insoluble in lower alcohols and water. Polyethylsiloxane fluids are non-toxic, explosion-proof.
Technical index:
Item |
IOTA 2056 PES -1 |
IOTA 2056 PES-2 |
Appreance |
colorless to pale yellow liquid |
|
Viscosity at 25°C, mm2/s |
34-40 |
180-280 |
Refractive Index, 25°C |
1.44 |
1.44 |
Flash point, °C |
>170 |
>265 |
Density at 20°C g/cm3 |
0.95-0.98 |
0.99-1.02 |
Solidifying point, °C |
<-70 |
<-70 |
Acid value, KOH mg/g |
<0.1 |
<0.1 |
Application areas of polyethylsiloxane fluids:
IOTA 2056 PES Polyethylsiloxane fluids are used in hydraulic systems( cooling and power fluids), in instruments (lubricating oils), as well as they serve as low-temperature oil base.
These fluids provide a stable operation of instruments and mechanisms in the extreme cold regions. The good dielectric properties of polyethylsiloxane allow using them as instrumental fluid in electronic mechanisms. They are used at the operating temperature from minus 70-150°C.
In chemistry and petrochemistry:
- Basic element of textile composition used in cord tissue for tire industry. It reinforces fibers, improves tire quality
- Release agent and modifier in molding materials, glass-reinforced plastic
- Anti-dust additive in pigment manufacture
- Heat transfer agent operating at 150-200°C in open systems and at 180-250°C in closed ones
- Release emulsion base at compounded rubber plants
- Plasticizer in the manufacture of rubber products
- The base of general-purpose greases
In cosmetics:
- Cream base, additive to lipstick and mascara.
In aircraft and car industry:
-
Damping fluid, liquid grease, shock absorbing
fluid base, heat transfer agent.
IOTA CORPORATION LTD.
Contactor: Nathan Zhang
Add: Sunmoon industry park, 985 Xingzhong Road, Bengbu, China 233000
TeL: 0086-18119733779/0086-19805521900
Mobile/Wechat: 0086-18119733779
Skype: zhangyang8777
QQ: 729118868
Email: info@iotasilicone.com
Website: www.iotasilicone.com