Home    Industry News    Application of hydrophilic silicone oil 6156a

Application of hydrophilic silicone oil 6156a

Hits: 3890589 2020-03-26

Product Description: hydrophilic silicone oil 6156a is suitable for hydrophilic, super soft and slippery finishing of all kinds of fabrics. After finishing, the fabric has good hydrophilic, soft and slippery properties, especially for the special (mercerized) hand finishing of cotton, rayon and modal stretchers.
Physical index of product:
Table 1 basic indicators of products
Product stability:
Temperature stability:
The hydrophilic silicone oil 6156a was prepared with tap water to prepare 50g / L sample solution. It was placed at room temperature for 10min and observed. It was placed in a constant temperature water bath at 40-80 ℃ for 30-60min and observed.
Table 2 temperature stability
Stability of alkali resistance
The hydrophilic silicone oil 6156a is made up of 50g / L sample solution with tap water, the pH is adjusted to 9-10 with alkali, the sample solution is placed at room temperature for 10min, and placed in a constant temperature water bath at 40-80 ℃ for 30-60min to observe the phenomenon.
Table 3 alkali resistance stability
Anionic stability
The hydrophilic silicone oil 6156a is made up of 50g / L sample solution with tap water, added with anionic surfactant in a certain proportion, placed at room temperature for observation for 10min, placed in a constant temperature water bath at 40-80 ℃ for 30-60min, and observed the phenomenon.
Table 4 anion resistance stability
It can be seen from table 2, table 3 and table 4 that the hydrophilic silicone oil 6156a has good stability of temperature resistance, alkali resistance and anion resistance.
Product application effect:
Process formula and conditions
Fabric: blue cotton knitted fabric
Dip rolling process:
Hydrophilic silicone oil 6156a: 30g / L
Process: dip rolling (one dip and one roll, rolling margin 75% - 85%) → setting (160 ℃, 80s) → moisture regain (20-30min) → comparison of hand feel and hydrophilicity.
hand valuation
The evaluation consists of more than three people in a group, and the tactile evaluation is the best at level 5.
Table 5 hand feeling after finishing
It can be seen from table 5 that the hand feel of the hydrophilic silicone oil 6156a is better than that of the general hydrophilic silicone oil.
Hydrophilicity test
Put the finished fabric (after full moisture return) on the table, drop a drop of water 2cm above the cloth surface with buret, and start timing. When the water drops gradually change from reflective to non reflective watermark, stop timing, and measure 6 points to take the average value.
Table 6 hydrophilicity after finishing
It can be seen from table 6 that the hydrophilicity of the hydrophilic silicone oil 6156a is better than that of the general hydrophilic silicone oil.
Product performance summary:
It is suitable for cotton, rayon, audale, rayon frame and modal frame;
It has excellent hydrophilic, soft and slippery effect on rayon, modal and pure cotton;
The fabric is endowed with excellent resilience, oiliness and drapability;
It has good hydrophilicity;
It is used for special hand finishing to give the fabric excellent softness, fullness and icy silk feeling;
It can be used alone or in combination with other softeners;
Good stability, no sticking roller.
Product precautions:
The residual alkali and instability of textiles and the pH value in water will affect the finishing effect. It must be cleaned before finishing.
The water used for working fluid shall be tap water ≤ 200ppm, and the ground water or river water shall be treated and reused.
Pay attention to the use in the rolling groove: when there are many burrs, pay attention to the refueling and cleaning of the rolling groove.
This product is a weak cationic product. If coating, adhesive and other anionic products are used in the chemical tank, the re chemical material shall be cleaned.
Although softener emulsion is compatible with most cationic and non-ionic additives, it is necessary to check its compatibility before mixing. The stability of emulsion will also be affected under extreme conditions.
Company profile:
Qingyuan Hongtu Auxiliaries Co., Ltd. (Guangdong Honghao Chemical Co., Ltd.), founded in 2005, is a comprehensive large-scale production enterprise integrating textile printing and dyeing auxiliaries, R & D, production, sales and technical service support. Its main products are environmental friendly wet friction fastness enhancer, hydrophilic ice sensitive silicone oil, active, acid fixing agent and various printing and dyeing auxiliaries, functional finishing agents, daily chemical auxiliaries, enzyme products.
Recently, Qingyuan Hongtu Auxiliaries Co., Ltd. was awarded the title of "top 20 comprehensive strength in China Textile Auxiliaries Industry" by China Dye Industry Association and textile auxiliaries professional committee
If you need to ask for samples or discuss other cooperation methods with our company, please click the following figure to get contact information:
Qingyuan Hongtu auxiliary Co., Ltd
Guangdong Honghao Chemical Co., Ltd
headquarters
Contacts:
Dai Gong 13620560613
Zhou Shaofeng 13926173557
Hu Haiying 13620572304
(grand plan)
Tel: 0763-5822256
Fax: 0763-5822257
(Hong Hao)
Tel: 0758-3108293
Fax: 0758-3371559
Website: http://www.ht303.com
E-mail:ht303@ht303.com
Address:
(Hongtu) Huilan Bailian tree garden, Taihe Town, Qingxin District, Qingyuan City, Guangdong Province
(Honghao) no.a0602-1 fine chemical base, Jianggu Town, Sihui City, Zhaoqing City, Guangdong Province
Information source: Qingyuan Hongtu auxiliary Co., Ltd
Welcome to QR code
Pay attention to us

Online QQ Service, Click here

QQ Service

Wechat Service